gtAdmin/CatTools
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update Step

Browse Source
This commit is contained in:
喵二
2024-07-25 19:04:46 +08:00
committed by GitHub
parent d9a6bda186
commit a7cbfaeee3
1 changed files with 18 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
cattools.sh
View File

@@ -136,7 +136,10 @@ setip() {
# Network Wizard # Network Wizard
network_wizard() { network_wizard() {
read -p "Do you want Network Wizard? /// 是否使用网络向导？([Enter] 确认 / [0] 退出): " use_wizard echo ""
echo ""
echo ""
read -p "[Step1] Do you want Network Wizard? /// 是否使用网络向导？([Enter] 确认 / [0] 退出): " use_wizard
if [ "$use_wizard" == "0" ]; then if [ "$use_wizard" == "0" ]; then
echo "网络向导已退出。" echo "网络向导已退出。"
return return
@@ -146,7 +149,7 @@ network_wizard() {
iface_count=$(echo "$interfaces" | wc -w) iface_count=$(echo "$interfaces" | wc -w)
if [ "$iface_count" -eq 1 ]; then if [ "$iface_count" -eq 1 ]; then
echo "Detected a single network interface /// 检测到单个网口" echo "[Step2] Detected a single network interface /// 检测到单个网口"
read -p "是否进行旁路网关设置？([Enter] 确认 / [0] 跳过旁路设置)：" choice read -p "是否进行旁路网关设置？([Enter] 确认 / [0] 跳过旁路设置)：" choice
if [ "$choice" != "0" ]; then if [ "$choice" != "0" ]; then
bypass_gateway bypass_gateway
@@ -154,7 +157,7 @@ network_wizard() {
fi fi
fi fi
echo "CatWrt default IP is 192.168.1.4 /// 默认 CatWrt IP 为 192.168.1.4" echo "[Step3] CatWrt default IP is 192.168.1.4 /// 默认 CatWrt IP 为 192.168.1.4"
read -p "是否修改 IP 地址？([Enter] 保持默认 / [0] 自定义): " modify_ip read -p "是否修改 IP 地址？([Enter] 保持默认 / [0] 自定义): " modify_ip
if [ "$modify_ip" != "0" ]; then if [ "$modify_ip" != "0" ]; then
read -p "请输入 IP (默认为 $DEFAULT_IP): " input_ip read -p "请输入 IP (默认为 $DEFAULT_IP): " input_ip
@@ -169,7 +172,7 @@ network_wizard() {
echo "IP 地址已设置为 $input_ip" echo "IP 地址已设置为 $input_ip"
fi fi
echo "IPv6 is enabled by default /// IPv6 默认是开启的" echo "[Step4] IPv6 is enabled by default /// IPv6 默认是开启的"
read -p "是否禁用 IPv6 网络？([Enter] 跳过 / [1] 禁用): " disable_ipv6 read -p "是否禁用 IPv6 网络？([Enter] 跳过 / [1] 禁用): " disable_ipv6
if [ "$disable_ipv6" == "1" ]; then if [ "$disable_ipv6" == "1" ]; then
uci delete dhcp.lan.dhcpv6 uci delete dhcp.lan.dhcpv6
@@ -179,7 +182,7 @@ network_wizard() {
echo "IPv6 已禁用" echo "IPv6 已禁用"
fi fi
echo "Default connection mode is DHCP /// 默认模式为 DHCP" echo "[Step5] Default connection mode is DHCP /// 默认模式为 DHCP"
read -p "是否进行 PPPoE 拨号？([Enter] 继续 DHCP / [1] PPPoE 拨号): " use_pppoe read -p "是否进行 PPPoE 拨号？([Enter] 继续 DHCP / [1] PPPoE 拨号): " use_pppoe
if [ "$use_pppoe" == "1" ]; then if [ "$use_pppoe" == "1" ]; then
read -p "请输入宽带账号: " username read -p "请输入宽带账号: " username
@@ -190,7 +193,7 @@ network_wizard() {
echo "PPPoE 拨号配置已完成" echo "PPPoE 拨号配置已完成"
fi fi
echo "Use recommended DNS servers 223.6.6.6 119.29.29.99?" echo "[Step6] Use recommended DNS servers 223.6.6.6 119.29.29.99?"
read -p " /// 使用推荐的 DNS 服务器 223.6.6.6 119.29.29.99 吗？([Enter] 确认 / [0] 跳过): " use_dns read -p " /// 使用推荐的 DNS 服务器 223.6.6.6 119.29.29.99 吗？([Enter] 确认 / [0] 跳过): " use_dns
if [ "$use_dns" = "0" ]; then if [ "$use_dns" = "0" ]; then
exit 0 exit 0
@@ -205,7 +208,7 @@ network_wizard() {
fi fi
fi fi
echo "Do you want to change the DHCP IP pool range? (default: 30-200)" echo "[Step7] Do you want to change the DHCP IP pool range? (default: 30-200)"
read -p " /// 是否修改 IP 可用段？(默认: 30-200 按 [Enter] 确认 / [1] 自定义范围 ): " dhcp_choice read -p " /// 是否修改 IP 可用段？(默认: 30-200 按 [Enter] 确认 / [1] 自定义范围 ): " dhcp_choice
if [ "$dhcp_choice" = "1" ]; then if [ "$dhcp_choice" = "1" ]; then
read -p "Enter the DHCP IP pool range (e.g., 40-210) /// 输入 DHCP IP 地址范围 (例如: 40-210): " dhcp_range read -p "Enter the DHCP IP pool range (e.g., 40-210) /// 输入 DHCP IP 地址范围 (例如: 40-210): " dhcp_range
@@ -223,14 +226,14 @@ network_wizard() {
uci set dhcp.lan.limit=200 uci set dhcp.lan.limit=200
fi fi
echo "enable DHCP force /// 开启 DHCP 强制可以避免局域网收到 AP 吐地址的问题" echo "[Step8] enable DHCP force /// 开启 DHCP 强制可以避免局域网收到 AP 吐地址的问题"
read -p "是否开启强制 DHCP 模式？([Enter] 确认，按 [1] 跳过): " force_dhcp read -p "是否开启强制 DHCP 模式？([Enter] 确认，按 [1] 跳过): " force_dhcp
if [ "$force_dhcp" != "1" ]; then if [ "$force_dhcp" != "1" ]; then
uci set dhcp.lan.force=1 uci set dhcp.lan.force=1
echo "强制 DHCP 模式已开启" echo "强制 DHCP 模式已开启"
fi fi
echo "Enable UPNP by default /// 默认开启 UPNP，可提升 BT/P2P 软件连接性，但客户端容易受到流氓软件滥用 P2P 网络导致上行带宽异常!" echo "[Step8] Enable UPNP by default /// 默认开启 UPNP，可提升 BT/P2P 软件连接性，但客户端容易受到流氓软件滥用 P2P 网络导致上行带宽异常!"
read -p "是否开启 UPNP？([Enter] 确认，按 [1] 跳过): " enable_upnp read -p "是否开启 UPNP？([Enter] 确认，按 [1] 跳过): " enable_upnp
if [ "$enable_upnp" != "1" ]; then if [ "$enable_upnp" != "1" ]; then
uci set upnpd.config.enabled=1 uci set upnpd.config.enabled=1
@@ -240,7 +243,7 @@ network_wizard() {
# 仅在 x86 和 aarch64_generic 架构上进行网口绑定 # 仅在 x86 和 aarch64_generic 架构上进行网口绑定
if [ "$arch" = "amd64" ] || [ "$arch" = "aarch64_generic" ]; then if [ "$arch" = "amd64" ] || [ "$arch" = "aarch64_generic" ]; then
echo "Configure network interfaces /// 配置网口" echo "[Step9] Configure network interfaces /// 配置网口"
echo "" echo ""
echo " Wan LAN1 LANx ..." echo " Wan LAN1 LANx ..."
echo " eth0 eth1 ethx ..." echo " eth0 eth1 ethx ..."
@@ -254,9 +257,9 @@ network_wizard() {
iface_count=$(echo "$interfaces" | wc -w) iface_count=$(echo "$interfaces" | wc -w)
if [ "$iface_count" -eq 1 ]; then if [ "$iface_count" -eq 1 ]; then
echo "Detected a single network interface, no configuration needed /// 检测到单个网口，无需配置" echo "[Step9] Detected a single network interface, no configuration needed /// 检测到单个网口，无需配置"
else else
echo "Detected multiple network interfaces /// 检测到多个网口" echo "[Step9] Detected multiple network interfaces /// 检测到多个网口"
# 默认桥接网口为 eth1，检测其他可用网口并添加到桥接列表 # 默认桥接网口为 eth1，检测其他可用网口并添加到桥接列表
bridge_ports="" bridge_ports=""
for iface in $interfaces; do for iface in $interfaces; do
@@ -294,7 +297,7 @@ bypass_gateway() {
# 输入主路由的 IP 地址 # 输入主路由的 IP 地址
while true; do while true; do
echo "" echo ""
read -p "请输入主路由的 IP 地址（例如 192.168.31.1）：" router_ip read -p "[Step3] 请输入主路由的 IP 地址（例如 192.168.31.1）：" router_ip
if [ -z "$router_ip" ]; then if [ -z "$router_ip" ]; then
echo "主路由 IP 地址不能为空，请重新输入。" echo "主路由 IP 地址不能为空，请重新输入。"
elif ! echo "$router_ip" | grep -Eq '^(10|172\.(1[6-9]|2[0-9]|3[01])|192\.168)\.'; then elif ! echo "$router_ip" | grep -Eq '^(10|172\.(1[6-9]|2[0-9]|3[01])|192\.168)\.'; then
@@ -309,7 +312,7 @@ bypass_gateway() {
default_device_ip="${subnet}.4" default_device_ip="${subnet}.4"
while true; do while true; do
read -p "本机 IP 地址为 $default_device_ip 按回车键确认，或输入新的 IP 地址：" device_ip read -p "[Step4] 本机 IP 地址为 $default_device_ip 按回车键确认，或输入新的 IP 地址：" device_ip
if [ -z "$device_ip" ]; then if [ -z "$device_ip" ]; then
device_ip="$default_device_ip" device_ip="$default_device_ip"
break break
@@ -325,7 +328,7 @@ bypass_gateway() {
echo "本机(旁路网关) IP 地址：$device_ip" echo "本机(旁路网关) IP 地址：$device_ip"
echo "" echo ""
echo "Use recommended DNS servers 223.6.6.6 119.29.29.99?" echo "[Step5] Use recommended DNS servers 223.6.6.6 119.29.29.99?"
read -p " /// 使用推荐的 DNS 服务器 223.6.6.6 119.29.29.99 吗？([Enter] 确认 / [0] 跳过): " use_dns read -p " /// 使用推荐的 DNS 服务器 223.6.6.6 119.29.29.99 吗？([Enter] 确认 / [0] 跳过): " use_dns
if [ "$use_dns" = "0" ]; then if [ "$use_dns" = "0" ]; then
exit 0 exit 0